This product is powered on and normally works within 5 minutes. Remember
to turn off the power supply immediately to avoid unnecessary losses caused
by excessive preheating. Note: If it is not used according to the operation
regulations and causes damage other than the machine, our factory will not
assume any responsibility.
1. Put the oil pump probe into the disinfectant.
2. After turning on the power, press the switch button to the ‘Ⅰ’ position to
warm up for 3-5 minutes.
3. Turn the button to the right to start the disinfection machine and time it.
4. Turn off the machine after use and unplug the power.
5. Finally press the middle ‘O’ reset switch to return to the home position.
6.Cleaning function: Put the probe in clean water, switch on ‘Ⅱ’ and turn on